| 185 |
Grégoire
Herzog |
Tyndall |
Fabrication
of a microfluidic device for biofuel cells |
| 184 |
Dr.
Patrick Fournet |
NUIG |
Ink-Jetting
of NUI
Galway
’s ArgentinkTM’ silver nanoparticles
|
| 183 |
Dr.
Gerard Kelly |
CIT |
Smart System for
Monitoring Concrete Curing & Structural Health
|
| 182 |
Enrico
Andreoli |
NUIM |
Characterisation
of polymers modified with metal nanomaterials and
supramolecular cages |
| 181 |
Dr.
Fiona Regan |
DCU |
Bio-inspired Design of Novel Antifouling Coatings for Sensor Applications: The role of Microtopography in Biofouling Control |
| 180 |
Dr.
Dónal Leech, Dr. Tony Scanlan |
NUIG/UL |
Development
of an integrated sensor array for monitoring and
evaluating toxicity of pollutants in waste waters |
| 179 |
Agus
Hatta |
DIT |
Fabrication
of the optical core of an integrated ratiometric
wavelength monitoring device based on Silicon On
Insulator (SOI) technology |
| 177 |
Gordon
Armstrong |
UL |
Characterisation
of High Performance Elastomer Nanocomposite Thermal
Interface Materials (C-HiPerTIM) |
| 176 |
Prof.
Dmitri B. Papkovsky |
UCC |
Design
and fabrication of customised SiO2-coated plasticware
for bioanalytical applications |
| 174 |
Dr.
John O’Donoghue, Dr. John Herbert, Dr. David Sammon,
Dr. Kieran A. O’Connor |
UCC,
Mercy University Hospital, South Infirmary Victoria
University Hospital |
A Medical Based
Body Area Network for Falls Assessment |
| 173 |
Dr.
Alan Mathewson |
Tyndall |
Development of
planar capacitors for 3-D integrated stacked systems |
| 172 |
Dr.
Bryan
Hennelly, Thomas Naughton |
NUIM |
Manufacture
of pinhole array masks for CCDs for superresolution in
digital holography |
| 171 |
Dr.
Mirek Macka |
DCU |
LED – optical filter – optical fibre
(LED-OF2) micro-packaged light source
devise for fluorescence detection in capillary,
microcolumn and microfluidic chip formats |
| 170 |
Dr.
Anne Moore |
UCC |
Design and Fabrication of Microneedle Arrays for Transdermal Vaccine Delivery |
| 168 |
Dr. Vasily Melnikov |
TCD |
Fabrication of low-loss light guiding photonic structures for optical interconnects on a Si chip |
| 167 |
Michael Sheehy |
UL |
Characterisation and Simulation of Notched Micro-beams for Investigation of Failure Mechanisms under Shock and Vibration Stimuli |
| 166 |
Dr.
Jim Greer |
Tyndall |
Dual Side-Gated Junction Field Effect Transistors with Split Drain |
| 165 |
Prof.
Malcolm Smyth |
DCU |
EMμ – Electroactive Monolith μChip – The Next Generation of Separation Science
|
| 164 |
Dr.
Steven Bell |
QUB |
Microneedle Arrays
for Surface Enhancement of Tissue Raman Signals |
| 163 |
Fernando
Benito López |
DCU/RCSI |
Fabrication
of Solid Phase Extraction combined with HPLC
Separation High Pressure Microreactors |
| 162 |
Dr. Eric Dalton |
UL |
Fabrication of a
Carbon Nanotube interconnect
|
| 161 |
Prof.
Dermot Diamond |
DCU |
Development of a
Bluetooth layer for the Tyndall mote
|
| 160 |
Dr.
Niall English |
UCD |
Predicting
band gap changes of doped nickel and ferric oxides
with first principles simulations |
| 159 |
Ms. Rachel Walsh, Dr. June Frisby,
Dr. Peter McLoughlin |
WIT |
Development of controlled polymerisation techniques for the development of molecularly imprinted polymers
|
| 158 |
Prof.
GIl
Lee |
UCD |
Microfabrication of
Micro-magnet Arrays |
| 157 |
Mr. Timothy
Doody, Prof. Gerald C. O’Sullivan |
UCC |
Silicon microneedle mediated electroporation to enhance gene and drug delivery for the treatment of cancer |
| 156 |
Dr. Ryan F. Donnelly |
QUB |
Physicochemical characterisation of novel polymeric microneedle arrays designed for transdermal drug delivery. |
| 155 |
Ronan
McNulty |
UCD |
Pitch adaptors for
VELO silicon strip detector |
| 153 |
Dr. Cormac Eason |
UL |
Wet Etching of glass wafer, Anodic Bonding to Silicon Wafer and aluminium deposition and wire bonding |
| 152 |
Dr.
Greg Hughes, Dr. Paul Hurley, Dr. Emanuele Pelucchi |
DCU/Tyndall |
MOVPE growth of high quality InGaAs/InP epitaxial structures with small substrate misorientations |
| 151 |
Prof. Vincent Fusco |
QUB |
Mask Creation and Fabrication of a Micromachined Frequency Selective Surface |
| 150 |
Dr.
Brian Caulfield |
UCD |
Wireless
Equine Biomechanical Measurement System
|
| 149 |
Alan
Brown |
UU |
Evaluating
the effects of surface features at nano- and
micro-scales on cell responses to polymer surfaces
formed by hot embossing with a microfabricated silicon
stamp |
| 148 |
Dr.
Richard Farrell, Prof. Michael Morris |
UCC/TCD |
Direct
writing of HSQ films: creation of patterned HSQ films
for block copolymer (BCP) alignment |
| 147 |
Dr.
Pierpaolo Porta |
Tyndall |
Metal-dielectric
nanostructures
|
| 146 |
Dr.
Emilia Mitkova Mihaylova |
DIT |
Fabrication
of MEMS samples suitable for full-field optical
characterisation |
| 145 |
Dr.
Pagona Papakonstantinou |
UU |
Investigation of charge transport properties of doped diamond nanowires |
| 144 |
Dr.
Richard A Guinee |
CIT |
Extended
Experimental Testing and Verification of a Novel
Correlation Diagnostic Tester Methodology for
Transmission Line Fault Monitoring, Location and
Identification using Pseudorandom Binary Sequences |
| 143 |
Dr.
Liam McDaid, Heather Sayers, Mary McSorley |
UU |
Characterisation of miniaturised ISFET PH sensors |
| 142 |
Dr.
N McMillan |
IT
Carlow |
Ambient airflow microturbine sensor and power generator (AMSPG) |
| 140 |
Dr.
Paul Dawson |
QUB |
Resistive-metal-electrode
Schottky diodes for temperature- and molecular-sensing |
| 136 |
Dr.
John Slater |
LYIT |
Improving
the attachment efficiency and stability of DNA probes
on gold electrodes |
| 135 |
Prof.
Dr. Vladimir Yurchenko |
NUIM |
Dual-Layer
Frequency-Selective Grid Polarizers for THz
Applications |
| 132 |
Prof.
Michael Morris |
UCC/TCD |
Post
processing of graphoepitaxy directed self assembled
polymer nanostructured films: UV exposure, staining,
ICP and RIE etching |
| 130 |
Dr.
Stefan
Weber |
TCD |
Investigation
of Real-Time Medium Access Control in Short-Range
Mobile Ad Hoc Networks based on 802.15.4 ZigBee |
| 129 |
Dr.
Colette McDonagh |
DCU |
Time-Resolved
Photoluminescence of nanoparticle-based luminescence
enhancement systems |
| 128 |
Prof.
John Davenport |
UCC |
Micro-fouling
of micro-fabricated surfaces: a fractal approach |
| 126 |
Mikael
Fernström |
UL |
Wireless
Sensor Glove with Haptic Feedback for medical training |
| 125 |
Dr.
Tony Cafolla, Dr. Mary Pryce |
DCU |
Fabrication
and Electrical Characterisation of Hybrid
Nanocrystal-Molecule Assemblies |
| 124 |
Dr.
June Frisby, Dr. Peter McLoughlin |
WIT |
Preparation
of Uniform Molecularly Imprinted Polymer Beads Using
Micro-Fluidic Technology |
| 123 |
Dr.
I. Z. Rahman |
UL |
Magnetic
Characterization of RE doped Transition Metals and
Alloys Thin Films and Nanowires/Nanorods |
| 122 |
Dr.
Brendan Doggett |
DCU |
Realising
Electronic Devices on PLD-grown ZnO |
| 121 |
Dr.
Nikolay Petkov |
UCC |
Electron
beam lithography defined patterned substrates used as
nano-imprint stamps to guide growth of ordered anodic
alumina films |
| 120 |
Greg
Doyle |
IT
Carlow |
Data-diffraction
Metrology Capability Test Programme |
| 119 |
Dr.
Syed Tofail |
UL |
Metal
Oxide Formation at the Surface of Metallic Alloys |
| 118 |
Tony Flaherty, Fabien Bernard |
NUIG |
Characterisation
of Heat-Affected Zones (HAZ) in laser machined parts |
| 115 |
Dr.
Justin D. Holmes |
UCC |
Templated
Growth and Electrical Contacting of Nanowire Arrays on
Silicon Substrates |
| 114 |
Prof. Michael Morris |
UCC/TCD |
Electron beam lithography defined patterned substrates for directed self-assembly of polymer nanostructures for alignment of nanotubes and nanowires |
| 112 |
Thejesh N. Bandi |
CIT |
Fabrication of planar silica disk microcavity resonators |
| 110 |
Dr. Grace Morgan |
UCD |
Electronic structure of spin-crossover manganese(III) complexes |
| 109 |
Dr.
Florence McCarthy |
UCC |
Design of novel Ellipticine c-Kit kinase inhibitors |
| 108 |
Dr.
Justin Holmes |
UCC |
Understanding
the Growth of Bamboo-Structured Carbon Nanotubes on
Cu/Mo Catalysts |
| 107 |
Prof. M. Peter Kennedy |
UCC |
Frequency Synthesizer Applications Using a Xilinx Virtex-5 LX Prototype Platform |
| 106 |
Alan
Conneely |
NUIG |
Laser
surface engineering of semiconductors for enhanced
electrical contact adhesion |
| 105 |
Dr. Justin D. Holmes |
UCC/TCD |
Computational Modelling of the Mechanical and Electronic Properties of Germanium Nanowires |
| 104 |
Dr.
Cormac Eason |
UL |
DRIE micromachining of silicon to create superhydrophobic surfaces |
| 103 |
Dr. C. Y. Ching, Dr. A.J. Robinson, Dr. G. O’Donnell |
TCD |
Development of electrohydrodynamic ion-drag micropumps for microscale electronics cooling systems |
| 102 |
Prof.
Cormac Sreenan |
UCC |
Deployment,
Characterisation and Test of a Ruggedised Wireless
Sensor Network |
| 100 |
Dr.
Peter Barron |
TCD |
Sensor Augmented Sporting Artefact
(SASA) |
| 99 |
Dr.
Y.K. Gun’ko |
TCD |
Modelling
of chiral quantum dots |
| 98 |
Stephen
Gilmartin |
UL |
The fabrication of novel thermal nanosensor
structures using electon beam nanolithography |
| 97 |
Dr.
Michael Connelly |
UL |
Quantum-Dot
Semiconductor Optical Amplifier Polarisation Rotation
Based All-Optical Logic |
| 96 |
Dr.
Catherine Deegan, Niall Campbell |
ITB |
Wireless Mechanomyography System |
| 95 |
Dr.
R.T.Rajendra Kumar, Dr.Enda McGlynn |
DCU |
Electrical
characterisation of ZnO nanorods (ZnO NR) for
ultra-violet (UV) sensor applications |
| 94 |
Dr.
Tatiana Perova |
TCD |
Fabrication
of the photonic structures on <100> Si by deep
reactive ion etching for micro-photonics and optical
interconnects |
| 93 |
Dr.
Liam Barry |
DCU |
Frequency
Resolved Optical Gating Characterisation of Fast
Optical Switch operating at data rates up to 160
GBit/s |
| 92 |
Dr.
Aidan Quinn |
Tyndall |
Fabrication
of Electrical Nanocontacts to Nanocrystal Assemblies |
| 91 |
Dr.
Donna Arnold, Matthew Shaw, Prof. Michael Morris, Dr. Justin Holmes |
UCC |
Controlled Planarisation of Oriented Mesoporous Thin Films |
| 90 |
Dr.
James O’Callaghan |
Tyndall |
Quantum
dot intermixing for superluminesencent diodes |
| 89 |
Dr.
Kevin M. Ryan |
UL |
Lithographic
patterning of substrates for perpendicular nanorod
assembly |
| 87 |
Dr.
Jeff Punch |
UL |
Design
and Fabrication of Notched Micro-beams for Impact
Experimentation |
| 86 |
Dr.
Alan G. Ryder |
NUIG |
Preparation of reproducible, high aspect ratio nanostructures for Metal Enhanced Fluorescence (MEF) substrates |
| 85 |
Dr.
Simon Lawrence |
UCC |
Electroless
Plating in Porous Alumina Membranes |
| 84 |
Dr.
Yuliya Semenova, Dr. Gerald Farrell |
DIT |
Liquid
Crystal Based Devices for Fibre-Optic Networks |
| 83 |
Dr.
Ivan F. Bendezu |
LYIT |
DNA
Microchip for detection of marine bivalve larvae |
| 82 |
Walter
O'Grady, Dr. Marcus Keane |
UCC |
Development
of WSN in Building Management Systems |
| 80 |
Dr.
Aoife Moloney |
DIT |
SOI
CMOS Active Quench/Reset Single Photon Counting
Circuit |
| 79 |
Dr.
Sebastian Favre |
NUIG |
Development
of test structures for use the investigation of plasma
expansion dynamics and time of flight measurements
observed in femtosecond laser ablation of metals |
| 78 |
Dr.
Richard A Guinee |
CIT |
A
Feasibility Study concerning a Novel Pulse Echo
Correlation Diagnostics Test methodology for
Transmission Line Condition Monitoring, Fault Finding
and Identification using Pseudorandom Binary Sequences |
| 77 |
Prof.
John Davenport, Dr. Paddy Sleeman |
UCC |
Inertial
tracking of badgers |
| 76 |
Dr.
Dominic Zerulla |
UCD |
Sub-Diffraction
Limit Plasmonic Emitters |
| 75 |
Dr.
John Houlihan |
WIT |
Unstable
resonators for next generation high brightness quantum
dot devices |
| 74 |
Dr.
Valeria Nicolosi |
TCD |
Electrical
Characterisation of MoSI nanowires |
| 73 |
Prof.
John Donegan |
TCD |
Contacts
on GaAs Sample for Quantum Interference Experiments |
| 72 |
Eoin
Mc Gibney, Dr. John Barrett |
CIT |
An
Analysis of Moisture Absorption on the High Frequency
Properties of Flexible PCB Materials |
| 70 |
Robert
Lynch, Prof. Noel Buckley |
UL |
A
Fundamental Study of the Mechanism of Porous Layer
Formation in III-V Semiconductors in Aqueous
Electrolytes under Anodic Conditions |
| 68 |
Dr.
Julian Marchesi |
UCC |
Development
of an Integrated Potentiostat for a Miniaturised
Electronic Tongue System |
| 67 |
Antonio
Ruzzelli, Gregory O'Hare, Richard Tynan, Michael O'Grady |
UCD |
Dual-Channel
adaptive MAC for WSNs |
| 66 |
Prof.
Alan Smeaton, Mike McHugh |
DCU |
Wireless
Audio Sensor Creation |
| 65 |
Prof.
Igor Shvets |
TCD |
Electron
beam lithography for Giant Planar Hall Effect of
epitaxial magnetite film |
| 64 |
Dr.
Bryan Rodgers |
UL |
Drop
Impact Testing of Electronic Assemblies |
| 63 |
Dr.
Chris Bleakley |
UCD |
Wireless
sensor network motes for low power hardware-software
co-design |
| 62 |
Dr.
Humphrey Moynihan |
UCC |
Molecular-level
Control of Crystal Nucleation |
| 61 |
Dr.
Greg Hughes |
DCU |
Deposition
and characterisation of high-k dielectric layers on
indium phosphide substrates |
| 60 |
Mikael
Fernström |
UL |
Celeritas
- application of motes in performance art systems |
| 59 |
Dr.
David Lewis |
TCD |
Incorporating
and validating sensor capabilities into a pervasive
computing simulation tool |
| 56 |
Prof.
Dermot Diamond |
DCU |
Comparison
Studies of Tyndall and CrossBow Inc. Motes in
Chemo-sensor and Wearable Sensor Networks |
| 55 |
Dr.
Stephen Hegarty |
Tyndall |
Monolithically
integrated quantum dot lasers and modulators |
| 53 |
Patrick
Wulliamoz |
TCD |
Micromechanical
modelling of normal, drug treated and osteoporotic
bone using non-destructive testing and finite element
analysis |
| 52 |
Dr.
Anthony Grant |
CIT |
Fabrication
of Coated Cantilevers for Scanning Force Microscopy
and Biosensor Applications |
| 51 |
Dr.
Peter McLoughlin |
WIT |
Design
& fabrication of silicon micro-needle arrays for
use in transcutaneous drug monitoring |
| 49/50 |
Chris
Murray, Dr. Sebastian van Dijken |
TCD |
Production
of thin Si membranes using SOI wafers |
| 48 |
Prof.
Khalil Arshak |
UL |
Fabrication
of nanoscale potentiometric pH biosensors using FIB
nanolithography |
| 47 |
Brian
Corbett |
Tyndall |
Incorporating
photonic crystals into quantum dot lasers at 1300nm |
| 46 |
Dr.
Michael Reid |
UL |
The
development of a nickel-phosphorus copper diffusion
barrier for connectors |
| 45 |
Prof.
ME Pemble |
Tyndall |
Novel
III-V Structures from Synthetic Opal Templates |
| 44 |
Brian
Shortt |
CIT |
Anti-reflection
coating at 780 nm on UHV viewports |
| 43 |
Dr.
Mike Loughran |
Tyndall |
Fabrication
of silicon devices for microfluidic and microbead
applications |
| 42 |
Dr.
S. Neely, Dr. S. Dobson |
UCD |
Device
Positioning Using Smart Zigbee Beacons |
| 40 |
Dr.
Rod Shepherd, Prof. Dermot Diamond |
DCU |
Customised
light emitting diodes for enhanced performance optical
chemical sensors |
| 39 |
Brendan
O'Flynn |
Tyndall |
Antenna
Design, Fabrication/Characterization |
| 38 |
John
Barton |
Tyndall |
Fabrication
of Micro Solar Cells for the 25mm Mote |
| 37 |
Robert
Lynch, Prof. Noel Buckley |
UL |
Study
of the Mechanism of porous layer formation in III-V
semiconductors in aqueous electrolytes under anodic
conditions |
| 36 |
Dr.
I. Z. Rahman |
UL |
Design
and Fabrication of Coplanar Waveguides |
| 35 |
Dr.
William Wright |
UCC |
Manufacture
of novel capacitive Micromachined Ultrasonic
Transducer (cMUT) MEMS |
| 34 |
Gerard
O'Sullivan, Norma Scully |
UCC |
Analysis
of silicas, derivatised using supercritical carbon
dioxide |
| 33 |
Dr.
Lien Ngo |
TCD |
Electron
Beam Lithography for Electrical Measurements of
Semiconducting Nanowires |
| 32 |
Dr.
Carsten Wegener |
UCC |
Characterisation
of an FPAA based Sigma Delta ADC |
| 30 |
Dr.
Greg Hughes |
DCU |
Fabrication
and characterisation of high-k dielectric layers on
Germanium and Silicon substrates |
| 29 |
Prof.
Alan Cassells |
UCC |
Use
of wireless sensor nodes to create a sensor network
for the control of plant growth conditions |
| 28 |
Kieran
Hanly, Dr. Ronan Grimes |
UL |
Micro
Radial Flow Fan Rotor Fabrication |
| 27 |
Prof.
Donald Fitzmaurice |
UCD |
Electrical
Characterization of DNA Templated Gold Nanowires |
| 26 |
Brian
Barrett, Prof. Mark Davies |
UL |
Fabrication
of Plastic PCR Microchannels |
| 25 |
Prof.
John McInerney |
UCC |
Mode-locked
quantum dot lasers for short-pulse generation |
| 24 |
Prof.
Khalil Arshak |
UL |
Design
& fabrication of nanoscale potentiometric pH
biosensors using FIB nanolithography |
| 23 |
Prof.
Paul Townsend, Dr. Padraig Hughes |
Tyndall |
Towards
Hybridly-Integrated Transceivers for Quantum
Cryptography |
| 22 |
Dr.
Ravin Ginige |
Tyndall |
Single
Junction Solar Cells on ‘Virtual’Substrates
(Ge/SiGe/Si) |
| 21 |
Brian
Mc Cormack |
TCD |
Fabrication,
inspection and dicing of SAW sensors |
| 20 |
Dr.
Dirk Pesch |
CIT |
Indoor
Environment Monitoring for Smart Buildings |
| 19 |
Dr.
John Herbert |
UCC |
QoS
Issues within a Medical environment using Wireless
Sensor Networks |
| 18 |
Stephen
Brown |
NUIM |
Lifetime
support for wireless sensor networks |
| 17 |
Dr.
Utz Roedig |
UCC |
Integration
of an FPGA in a Wireless Sensor Node |
| 16 |
Dr.
Peter McLoughlin |
WIT |
Investigation
into the mechanism of surface binding of metals to a
variety of seaweed species |
| 15 |
Dr.
Susan Ellingboe |
TCD |
Electron
Beam lithography alignment mark mask & substrate
fabrication |
| 14 |
John
O'Mahony |
CIT |
3D
Graphical Interface for the electronic glove |
| 12 |
Dr.
Martin Hill |
CIT |
High
tuning range MEMS variable capacitor for RF systems
(VARICAP) |
| 11 |
Ronan
O’Reilly |
ITT |
Fabrication
and testing of integrated chemical micro-sensors |
| 10 |
Dr.
Abdur Rahman |
UL |
Sensing
and analysing impacts on A wireless node |
| 9 |
Rory
Leahy |
TCD |
Substrate
patterning using Electron Beam Lithography (eBeam) |
| 8 |
Dr.
Guillaume Huyet |
UCC |
Quantum
Dot semiconductor lasers |
| 7 |
Dr.
Dimitrios Apatsidis |
NUIG |
Development
of novel packaging methods and reliability testing on
implantable thick film microelectronic modules |
| 6 |
Dr.
Susan Ellingboe |
TCD |
Nanowire
and nano-contacts |
| 5 |
Dr.
Robert Barklie |
TCD |
Growth
and characterisation of HfO 2 and ZrO 2 films on
silicon |
| 4 |
Dr.
Emanuel Popovici |
UCC |
Fault
Tolerance And Low Power Cryptography In Sensor
Networks |
| 3 |
Prof.
Michael Morris |
UCC |
Mesoporous
silica thin films for use ultra low materials for in
ILD/IMDs |
| 2 |
Dr.
Alan Morrison |
UCC |
Novel
implementation of a bias control system for avalanche
photodiodes (APDs) |
| 1 |
Dr.
Bob Manning |
UCC |
Fabrication
semiconductor optical amplifiers (SOAs) from an
existing quantum dot wafer |
